Input

• Power Supply- Single Phase 220V AC 50 Hz ± 10%
• Input pin type- Round 3-pin (L, N, E). European, Australian, US pin types available on request
• Measuring Bridge VA- max 500VA
• Heater VA- max 500VA

Test Voltage

• For Dielectric Constant & Tan-Delta- 60V to 2000V AC (in steps of 1V)
• For DC Resistivity- 100V to 2000V DC (in steps of 1V)
• Accuracy of Voltage setting- + (1% of set value + 10V)

Atmospheric

• Storage Temp- minus 20°C to +60°C
• Operating Temp- minus 10°C to +50°C
• Humidity- < 90% non-condensing

Heater

• Temperature Range- ambient to 110°C, resolution 0.1°C
• Temperature error- 0.5 °C (max)
• Time to 100°C- < 20 mins

Measured Parameters

• Tan Delta range- 0 to 4
• Tan Delta resolution- 0.000001 (10 -6)
• Tan Delta Accuracy- 1 % of reading + 0.00005
• Capacitance range-  15.0 pF to 1000 pF
• Capacitance resolution- 0.1 pF
• Capacitance Accuracy- 0.1% of reading + 0.5pF
• Dielectric Constant range- 1 to 20 when using a typical test cell (C ~ 50-60pF)
• Dielectric Constant resolution- 0.001
• Dielectric Constant Accuracy- + 0.1 %
• Resistance Range- 1 MΩ to 10 TΩ (not calibrated above 10TΩ)
• Resistance Resolution- 4 digits
• Resistance Accuracy-  5% of reading over entire range, 10% beyond 1TΩ
• Resistivity Range- 500 MΩ cm to 10000 TΩ cm (for type C empty – 55pF)
• Resistivity Resolution- 4 digits
• Resistivity Accuracy- 5% of reading over entire range, 10% for > 500TΩcm

•  Complete automatic test procedure. Once test voltage is selected, it applies excitation to the 3-terminal Oil cell, measures R, C, DF, F, V, and then displays and prints the results on integrated printer
• High Accuracy, Best resolution in its class
• Pure Sine test operation for AC measurements and <0.1% ripple for DC measurements>
• Heater interfaced with main unit for temperature set, control and display
• Multiple temperature set values programmable
• Programmable cell constant for Resistivity and Dielectric Constant
• SF6 Gas Capacitor integrated inside for standard reference
• 7" color TFT display with touch screen with wireless keyboard for user convenience
• Integrated Programmable AC & DC test voltages
• Thermal printer for immediate printing
• Pre-programmed 9 test sequences, and user-programmable 10 test sequences
• USB 2.0 interface for PC
• PC software for control and display of test results
• On-site calibration possible for yearly schedule
• Optional Bluetooth / RS485 / RF interface with user definable config, for Automated Laboratory setup

• Test equipment- 1 no*
• Heater unit- 1 no
• Closed cup SS Oil cell- 1 no
• Printer roll- 1 no (already loaded), plus 1 spare roll
• Connecting AC mains cable- 1 no
• Connection test leads- 1 set
• User manual (Video CD)- 1 no
• Test certificate- 1 no
• Warranty Certificate- 1no (Standard warranty 1 yr)